12 storey Hospital Building

Hospital buildings are supported on Pile Foundations. Building framing consists of shear walls, columns, shallow beams and slab. Project also includes Energy center and Mosque. The structural framing of the buildings is already completed.

6 storey Hospital Building

Building is supported on raft foundation. Structural framing consists of flat slab with edge beams and columns. The project also includes Energy Center. The structural framing of the buildings is already completed.

3 storey Office Building

This architectural award winning building is supported on pile foundations. Building framing consists of flat slab with shear walls and columns. Salient feature is the use of rammed earth technology on the facade of the building which is the first ever project in Pakistan. The project also includes about 100 feet tall tower structure and underground parking garage. This project was designed for seismic zone 3. The structural framing of the buildings is already completed.

7 storey Hospital Building

Building is supported on Isolated foundations. Building framing consists of flat slab with edge beams. The building consists of singe deep basement with high water table. The structural framing of the buildings is already completed. The preliminary design of this building was done by USA architect and structural engineer.

2-4 storey 37 University Buildings

All these campus department buildings are supported on hilly terrain and have been designed for worst possible seismic forces i.e. for Zone 4. The basic framing consists of beam, columns and slabs with isolated or combined foundations. The structural framing of the buildings is already completed.

Two 13 storey Residential Buildings

This project is currently under construction. These buildings are supported on raft foundation with 3 basements. Theses buildings have been designed foe Zone 3 forces. The basic framing consists of beams, columns and slabs.

13 storey Hospital Building

This project is currently under construction. The building is supported on pile foundation. The basic framing of the building consists of flat slab with edge beams, columns and shear walls. Top 3 levels of this building will consist of composite steel floor.

40 storey Hotel / Office Building

This project will soon be under construction. The hotel / office tower building is supported on raft and pile foundation. The basic framing of the building consists of central shear walls, edge columns and flat slab with edge beams. There are 3 basements under the building. Also there is a low rise 7 storey structure adjacent to the building. Building model was prepared & all project drawings were produced using Revit.

Seventeen 35 - 40 storey Residential Buildings

The project consisted of 17 high rise buildings with large podium. All these buildings were supported on pile raft foundation or pile foundation. Podium structure gravity framing consisted on flat slab. The basic framing consists of shear walls, beams, columns and slabs. Some of these buildings have already been constructed.

2-3 Storey Hospital Buildings

The hospital building is currently operational. All these hospital buildings are supported on isolated / combined foundation. Buildings were designed Zone 3 seismic forces using IBC code. The basic framing consists of flat slabs with edge beams, columns and shear walls for lateral resistance. Salient feature is the use of rammed earth technology on the facade of the building which is the first ever project in Afghanistan.

Two 35 Storey Tower Buildings

The framing of these two tower buildings consist of composite steel floor with central core walls and outer periphery columns. These tower buildings were designed for wind Exposure D being close to coastline. The structural framing of these office buildings is already completed.

Two 11 to 17 storey Hospital Buildings

The floor framing of these two tower buildings consisted of concrete pan joist system with concrete girders. The project also included deep transfer girders. These buildings are supported on pile foundations. The hospital buildings are already operational.

17 Storey Office Building

The framing of this tower building consisted of composite steel floor with central core walls and outer periphery steel columns. The office building is already functional.

3 Storey Retail / Residential Building

The framing of this Retail / Residential building consisted of concrete, steel and wood framing and pile foundation. The building is already constructed and functional.

2 Storey Office Building

The framing of this office building consisted of composite steel floor with steel columns and pile foundation. This office building is already functional.